Our Products

• SPECIALLY MADE FOR TEXTURED AND TILED SURFACES: First of its kind, innovative mat designed to stay put on textured tub and shower surfaces providing consistent non slip safety where standard suction cup mats fail.

• INNOVATIVE WEIGHTED DESIGN: 3-4x heavier than standard anti-slip mats, this float-free mat stays securely in place. Made from soft, flexible 100% TPE with wet-grip technology that conforms to your tub’s shape.

• COMFORTABLE ANTI-SLIP SURFACE: Features hundreds of Comfort Nubs for a comfortable, foot-friendly anti-slip surface during baths and showers with built-in drainage channels to prevent water accumulation.

• RELIABLE NON-SLIP PROTECTION: Micro-traction texture pads grip across grout lines, uneven, porous surfaces, pebble tile, and more. The suction cup free design simply stays where you lay it.

• PERFECT FIT & EASY TO CLEAN: Sized at 31” x 15” to work in most tubs and showers.

To Install:

Clean surface thoroughly prior to installation. Place mat with dotted texture facing upward, and small arrows pointing toward drain.

To Clean:

Rinse after each use, then air dry by hanging mat or rolling it and standing it on end. For a deeper clean, wipe with a damp sponge then air dry.

Warning:

Designed for use on textured surfaces only; not intended for use on smooth surfaces. No anti-slip product can prevent all accidents, so make sure your mat is secure before each use, and always use caution when entering or exiting your tub or shower.

Advertencia: Diseñado para usarse solo en superficies con textura. Este producto no está diseñado para usarse en superficies lisas. Siempre asegúrese de que el tapete esté en su lugar antes de entrar o salir de la tina o regadera. No existe un producto antideslizante que sea capaz de impedir todos los accidentes. Tenga cuidado cada vez que entre o salga de la tina o regadera.

Avertissement: Conçu pour être uniquement utilisé sur des surfaces texturées. Ce produit n’est pas destiné à être utilisé sur des surfaces lisses. Assurez-vous toujours que votre tapis soit bien en place avant d’entrer ou de sortir de la baignoire ou de la douche. Aucun produit antidérapant ne peut prévenir tous les accidents. Soyez toujours prudent lorsque vous entrez ou sortez de la baignoire ou de la douche.

• YOUR BATH SAFETY & COMFORT: Designed to deliver superior slip resistance and comfort, the SlipX Solutions Power Grip non slip bath mat offers a softer, more secure surface that enhances stability and relaxation in the tub or shower.

• INDUSTRY-LEADING GRIP: Our mat is equipped with 365 large, pliable power grip suction cups that are almost 30% larger and over 25% stronger than competing brands, ensuring a secure hold on smooth, non-textured surfaces for maximum slip resistance.

• SOFT & COMFORTABLE UNDERFOOT: Crafted from high-quality, soft-touch vinyl, this durable mat features a uniquely textured surface that enhances both slip resistance and comfort for a better bathing or showering experience.

• SUPERIOR DRAINAGE: Hundreds of large hexagonal drain holes prevent water from pooling, reducing the risk of standing water and allowing your mat to dry faster between uses and helping prevent buildup.

• OVERSIZED FULL-TUB COVERAGE: Measuring 39”L x 16”W, this extra-long mat covers 30% more surface area than standard bath mats, providing enhanced safety for seniors, children, and babies during baths or showers.

To Install:

Make sure the surface is clean. Run warm water, position the mat, then press down on the suction cups from above to engage. Confirm your mat is securely installed before entering the tub.

To Clean:

Simply peel off, rinse, and air dry after use. Machine washable in warm water – air dry.

Please Note: Designed for use on smooth surfaces. Some surface textures may affect adhesion. Always use caution when entering or exiting the tub. Not for use on refinished surfaces.

Diseñadas para uso en superficies suaves. Algunas texturas de Superficie pueden afectar la adhesión. Tenga siempre cuidado al entrar o salir de la bañera. No debe ser usado en bañeras con superficies reparadas.

Conçu pour être utilisé sur des surfaces lisses. Certaines textures de surface peuvent nuire à l’adhérence. Toujours porter une attention particulière lors de l’entrée et de la sortie de la baignoire. Ne pas utiliser sur les baignoires avec une surface rafraichit.

• CUSHIONED FOR COMFORT: Experience the ultimate in padded softness with the SlipX Solutions pillowtop bathtub mat. 700+ air-filled pillows offer extreme cushioning to reduce strain on tired or sore feet. This soft bath mat is perfect for the elderly, people with neuropathy, or those simply seeking extra comfort while bathing or showering.

• INNOVATIVE DUAL-LAYER SUPPORT: Featuring two quilted rubber layers, this anti slip tub mat is designed to improve safety, while providing comfortable cushioning for your hard tub or shower floors.

• ENHANCED SAFETY WITH STRONG SUCTION: Equipped with hundreds of strong hold suction cups, this tub mat ensures a secure hold on smooth, non-textured surfaces, offering slip-resistant protection for better peace of mind.

• DURABLE & RELIABLE MATERIALS: Made from high-quality natural rubber, this bath tub mat resists fading, cracking, and tearing, ensuring long-lasting performance and dependable use.

• EFFORTLESS MAINTENANCE: Cleaning is a breeze—rinse off soap residue, wipe it clean, and hang dry for a fresh, ready-to-use non slip mat every time. For added convenience, this bath mat is machine washable, too.

• WARNING-DESIGNED FOR SMOOTH SURFACES ONLY: For your safety, do not install over grout lines, voids or textured/uneven surfaces; all of which negatively affect adhesion. This product is not intended for use on refinished surfaces. Always make sure that your Pillowtop Bat Mat is securely attached before entering or exiting your tub, shower, or other slippery areas. No anti-slip product can prevent all accidents.

To Install:

Make sure surface is clean. Run warm water, position mat, then press down on suction cups from above to engage. Confirm your mat is securely installed before entering the tub.

To Clean:

Simply peel off, rinse, and air dry after use. Machine washable in warm water – air dry.

To Remove:

Slowly peel mat from surface, releasing individual suction cups with fingers if necessary. Removing mat too quickly or applying too much upward force to engaged suction cups may result in mat damage.

Please Note:

Designed for use on smooth surfaces. Some surface textures may affect adhesion. Always use caution when entering or exiting the tub. Not for use on refinished surfaces.

Diseñadas para uso en superficies suaves. Algunas texturas de superficie pueden afectar la adhesión. Tenga siempre cuidado al entrar o salir de la bañera. No debe ser usado en bañeras con superficies reparadas.

Conçu pour être utilisé sur des surfaces lisses. Certaines textures de surface peuvent nuire à l’adhérence. Toujours porter une attention particulière lors de l’entrée et de la sortie de la baignoire. Ne pas utiliser sur les baignoires avec une surface rafraichit.

• OVERSIZED COVERAGE FOR BETTER STABILITY: This extra-large shower mat provides 65% more coverage than standard 21″ shower stall mats. This oversized mat is perfect for stalls 27″ and up. For best results, measure your shower floor before purchasing to ensure proper fit.
  

• WORKS ON SMOOTH SURFACES ONLY (FIBERGLASS, ACRYLIC, PORCELAIN): Over 100 power grip suction cups grip firmly on smooth, untextured floors. They do not work over tile grout lines, textured surfaces, or refinished floors — check your shower surface type before purchasing.

• SLIP-RESISTANT PROTECTION FOR THE WHOLE FAMILY: Oversized coverage and 100+ grip suction cups work together to reduce slips and falls — giving kids, seniors, and everyone in between the confidence to move freely in the shower.

• FAST DRAINAGE HELPS PREVENT BUILDUP & ODOR: An aggressive drainage pattern, including a center drain hole, helps limit standing water, allowing the mat to dry faster.

• EASY TO INSTALL, REMOVE, AND CLEAN: This anti slip shower mat is easy to install, remove, and hang for drying. Plus, it’s machine washable for a deeper clean.

To Install:

Make sure surface is clean. Run warm water, position mat, then press down on suction cups from above to engage. Confirm your mat is securely installed before entering the shower.

To Clean:

Simply peel off, rinse, and air dry after use. Machine washable in warm water – air dry.

Please Note: Designed for use on smooth surfaces. Some surface textures may affect adhesion. Always use caution when entering or exiting the shower. Not for use on refinished surfaces.

Diseñadas para uso en superficies suaves. Algunas texturas de superficie pueden afectar la adhesión. Tenga siempre cuidado al entrar o salir de la ducha. No debe ser usado en bañeras con superficies reparadas.

Conçu pour être utilisé sur des surfaces lisses. Certaines textures de surface peuvent nuire à l’adhérence. Toujours porter une attention particulière lors de l’entrée et de la sortie de la douche. Ne pas utiliser sur les baignoires avec une surface rafraichit.

• PERFECT FIT FOR SHOWER STALLS – Specially designed in a 21” square shape, this shower mat provides reliable coverage for standard shower stalls while fitting neatly into smaller shower spaces. Ideal for apartments, guest baths, campers, RVs, dorms, and cottages.

• IMPORTANT SAFETY INFORMATION – Designed for use on clean, smooth, non-textured surfaces only. Do not install over grout lines, textured surfaces, refinished tubs, or uneven flooring, as these may reduce suction performance. Always verify the mat is securely attached before use. No anti-slip product can prevent all accidents.

• STEADY FOOTING WITH EVERY SHOWER – Over 160 flexible power grip suction cups help keep the mat securely in place on smooth shower floors, providing added slip resistance and confidence for everyday showering.

• COMFORTABLE UNDERFOOT – Made from soft, durable vinyl with a textured top surface that feels comfortable underfoot, while helping improve traction. A great choice for households with children, seniors, or anyone looking for added shower safety.

• QUICK-DRAINING DESIGN – Large center drain holes and hundreds of drainage holes allow water to flow freely, helping reduce pooling and promoting faster drying between uses.

• EASY TO CLEAN & MADE TO LAST – Durable vinyl construction stands up to daily use and is machine washable for easy care.

To Install:

Make sure the surface is clean. Run warm water, position the mat, then press down on the suction cups from above to engage.

To Clean:

Simply peel off, rinse, and air dry after use. Machine washable in warm water – air dry.

Warning: Designed for use on smooth surfaces only. For your safety, do not install over grout lines, voids, or textured/uneven surfaces, all of which negatively affect adhesion. This product is not intended for use on refinished surfaces. Always make sure that your mat is securely attached before entering or exiting your tub, shower or other slippery areas. No anti-slip product can prevent all accidents.

Advertencia: Diseñado para ser usado únicamente en superficies lisas. Por su seguridad, no lo coloque sobre juntas, huecos o superficies con textura/irregulares, ya que todo lo anterior afectará de manera negativa la adhesión. Este producto no está diseñado para ser usado en superficies retocadas. Siempre asegúrese de que su tapete esté bien sujeto antes de entrar o salir de su tina, regadera u otras áreas resbalosas. Ningún producto antiderrapante es capaz de prevenir todos los accidentes.

Avertissement : Il est conçu pour être utilisé uniquement sur des surfaces lisses. Dans un souci de sécurité, évitez de l’installer sur les lignes de coulis, les trous ou les surfaces texturées/irrégulières, car tous ces éléments ne lui permettent pas de se coller correctement. Ce produit n’est pas destiné à être utilisé sur des surfaces rénovées. Assurez-vous toujours que votre tapis est bien fixé avant d’entrer ou de sortir de votre baignoire, de votre douche ou de tout autre endroit glissant. Aucun produit antidérapant ne peut prévenir tous les accidents.

• ALL AROUND NON-SLIP COVERAGE: The SlipX Solutions unique, hard to find 23 inch diameter round shape shower mat is perfect for home, cottage, apartments, college dorms, guest bathrooms, campers, outdoor shower areas or unusually shaped bathroom shower spaces. Crystal clear color works with all bathroom color palettes.

• COMFORTABLE TOP TEXTURE: Made of durable, high-quality soft to the touch vinyl this round bath mat offers reliable slip-resistant traction and extra comfort underfoot during baths or long showers. Perfect for children, elderly people, & pregnant women who need added safety while they shower.

• POWERFUL GRIP: Featuring 160 extra pliable power grip suction cups, this is the best value mat available that fits in any standard sized shower stall. Attach to any smooth, non-textured surface for better slip-resistance.

• EXCELLENT DRAINAGE & MACHINE WASHABLE: A large, center drain hole and hundreds of drain holes throughout the safety mat reduce surface water by keeping water flowing during use and allowing for fast drying after use. This durable mat is machine washable & easy to clean.

• DESIGNED FOR USE ON SMOOTH SURFACES ONLY: Do not install over grout lines, voids, textured or uneven surfaces all of which negatively affect adhesion. This product is not intended for use on refinished surfaces. Always make sure that your mat is securely attached before entering or exiting your tub, shower, or other slippery areas. No anti-slip product can prevent all accidents.

To Install:

Make sure surface is clean. Run warm water, position mat, then press down on suction cups from above to engage. Confirm your mat is securely installed before entering the shower.

To Clean:

Simply peel off, rinse, and air dry after use. Machine washable in warm water – air dry.

Please Note: Designed for use on smooth surfaces. Some surface textures may affect adhesion. Always use caution when entering or exiting the shower. Not for use on refinished surfaces.

Diseñadas para uso en superficies suaves. Algunas texturas de superficie pueden afectar la adhesión. Tenga siempre cuidado al entrar o salir de la ducha. No debe ser usado en bañeras con superficies reparadas.

Conçu pour être utilisé sur des surfaces lisses. Certaines textures de surface peuvent nuire à l’adhérence. Toujours porter une attention particulière lors de l’entrée et de la sortie de la douche. Ne pas utiliser sur les baignoires avec une surface rafraichit.

• UNIQUE NON-SLIP SHOWER MAT WITHOUT SUCTION CUPS: Unlike typical plastic shower mats, our comfortable, cushioned shower pad features a non-slip mesh backing instead of suction cups, providing reliable anti-slip protection on a much wider variety of surfaces, including textured surfaces, refinished tubs, and tiled surfaces – in or out of the shower!

• PROTECTED AGAINST ODORS AND BUILDUP: Our luxurious spun-poly non-slip shower pad is treated to prevent unwanted odor and growth that often occurs in damp environments.

• INCREDIBLY SOFT, LUXURIOUSLY CUSHIONED: Twice as thick as similar mats, our cushioned shower pad is a dream come true for bathers with tired, sore feet. Enjoy a spa-like shower experience with extra cushioning, a loofah-like exfoliating top texture, and no more hard, bumpy, uncomfortable suction cups to stand on!

• A DELIGHTFULLY COMFORTABLE SAFETY MAT FOR THE WHOLE FAMILY: Perfect for elderly people with neuropathy, hard-working parents with sore, tired feet; and anyone else who wants to be comfortable while showering! Especially useful if you have a tiled shower, textured tub surface, or refinished bathtub!

• EXCELLENT DRAINAGE: Water flows right through our special high-drainage shower mat material, so you can place this pad right over your shower drain without worrying about pooling water, puddles, or a soggy shower mat! (Note: NOT FOR USE IN FULL BATHS; PAD WILL FLOAT).

• FINISHED EDGES: This one-of-a-kind shower tub pad features attractive finished edges that enhance mat durability and help prevent hair from accumulating along the mat borders, as it does on lower-quality mats with rough, unfinished edges. Measures 17 x 29.5 inches.

• DURABLE & EASY TO CLEAN: Simply rinse after use and hang dry! Also machine washable in warm water. Our unique finished edge design helps prevent possible separation of layers when thrown in the washer, a noted problem with lower-quality mats of this type.

To Use:

Intended for use in showers. Make sure surface is clean before placing pad in shower. Rinse after each use. Hang to air dry.

To Clean:

Machine wash in warm water: Air dry.

Please Note:

Always use caution when entering or exiting the tub, shower or other slippery areas. No anti-slip product can prevent all accidents.

Siempre tenga cuidado al entrar o salir de la tina, la regadera u otras areas resbalosas. Ningun producto antiderrapante es capaz de prevenir todos los accidentes.

Faites toujours preuve de prudence lorsque vous entrez ou de la baignoire, de la douche ou d autres endroits glissants. Aucun produit antiderapant ne

peut prevenir tous les accidents.

• BUILT-IN PROTECTION: This shower liner features integrated antimicrobial product protection that inhibits the growth of mold and mildew on the curtain’s surface—keeping it fresher and cleaner for longer.

• PREMIUM MIDWEIGHT DESIGN: Made from durable midweight 5G PEVA, this opaque white shower liner delivers reliable performance without the stiff, heavy feel of traditional liners. Easy to handle, install, and reposition.

• STAYS IN PLACE TO HELP PREVENT SPLASHES: Three weighted magnets at the bottom help reduce billowing and keep water inside the tub or shower where it belongs for a cleaner, drier bathroom floor.

• FULL COVERAGE FOR STANDARD SHOWERS: Measuring 70” W x 72” H, this waterproof shower curtain liner is sized to fit most standard tubs and shower enclosures. Features 12 tear-free, stainless steel buttonholes for lasting durability and easy hanging.

• A SAFER, EASY-CARE CHOICE: PVC-Free, Phthalate-Free, Odor-Free, and free from harsh chemicals. This liner is easy to clean, machine washable, and versatile enough to use alone or paired with your favorite decorative shower curtain.

Help Keep Your Liner Fresh

After showering, draw the liner closed so it can dry completely between uses. Regular cleaning also helps prevent buildup and keeps your liner looking fresh.

Care Instructions

Wipe clean with a damp cloth. Air dry.

Limpie la superficie con un trapo húmedo. Seque al aire.

Essuvez avec un chiffon humide pour nettoyer. Sécher à l’air.

• Peel-and-stick shower curtain clips keep your shower curtain flush against your shower walls to cut down on leaks and splashes.

• Enjoy warm showers without cold drafts and no water puddles on the floor to clean up afterward.

• Enhances bathroom safety, ensuring water stays in the shower and off the floor.

• No-hassle, simple installation — just peel and stick and enjoy a mess-free shower.

To Install:

• Apply to a clean, dry surface.

• Position first clip 2 inches above the stall floor or tub ledge.

• Ensure clip opening faces away from shower head and aligns with shower rod.

• Remove paper backing and press clip firmly against shower wall for 20 seconds.

• Position second clip above first, approximately halfway between first clip and curtain rod.

• Repeat on other side or where needed.

To Use:

• Using both hands to hold shower liner tight, slide edge of liner into open end of clips to create a seal between liner and wall.

• PREVENT DRAFTS AND LEAKS: This budget-friendly bathing accessory is the must-have shower hack you never knew you needed! Say goodbye to cold drafts and soaked bathroom floors with our easy-to-use shower curtain splash guards.

• SIMPLY EFFECTIVE: SlipX Solutions Splash Guards curve both ends of your curtain liner inward and hold them against your walls, forming a reliable barrier that keeps water inside your shower and cold air out!

• EASY TO USE: Simply attach a guard to each end of your shower liner as shown in the provided video. Once installed, our guards require no maintenance or adjustment.

• NEARLY INVISIBLE: Made of high-quality clear Lexan plastic, our Shower Splash Guards install on the inside of your outer shower curtain, making them virtually invisible to anyone outside of the tub/shower.

• NO TOOLS, ADHESIVES OR SPECIAL SKILLS NEEDED: Our Splash Guards install in just minutes, with no fuss, muss or mess.

• INCLUDED IN EVERY PACKAGE: Each package comes with two guards; one designed for each end of your shower curtain liner.

• Not designed for use with curved shower rods.

To Install:

1. Remove the liner from end ring, leaving the end ring attached to the curtain.
2. Attach open liner to hook at curved end of Splash Guard.
3. Position holes on Splash Guard with corresponding holes 2 & 3 on liner curtain.
4. Secure shower rings through Splash Guard, liner & curtain at holes 2 & 3 on liner
5. 

• HANDS-FREE HOLDING: SlipX Solutions On the Dot Suction Cup Hook puts your towel, phone, or razor in convenient reach—superior suction keeps your items securely on shower walls, mirrors, and other smooth surfaces.

• PHONE-FRIENDLY DESIGN: Made of durable plastic this strong suction cup hook is sturdy enough to be used as a phone cradle inside or outside of the shower, or on the mirror while you get ready for the day! Be sure to follow the installation instructions carefully.

• STRONG HOLD SUCTION: Holds up to 11 pounds and stays put!

• IDEAL RAZOR STORAGE: This two-hook design cradles your razor upright, allowing it to dry in between uses, compatible with razors that have a handle base less than 3/4” wide.

• ONE-PUSH INSTALLATION: Easily install the SlipX Solutions On the Dot soap saver with a single press. Press the suction cup firmly on a clean, smooth application surface to remove air underneath and create a secure seal that stays put. Reposition time and time again for years of use.

To Install:

• Make sure surface is clean.

• Remove plastic cover from suction cup.

• Position then push suction cup firmly to engage.

• If reinstalling, rinse and air dry before reuse.

To Remove:

• Slide straight edge tool under suction cup to release.

To Clean:

• Wipe clean with a damp cloth.

Use on smooth surfaces. Do not install over grout lines, voids, or textured surfaces. Removal may damage painted or refinished surfaces. Check manufacturer’s instructions before using any electronic device near water.

Para uso exclusivo en superficies lisas. No debe instalarse sobre líneas de juntas, huecos o superficies con textura. Puede dañar las superficies pintadas o barnizadas al retirarse. Consulte las instrucciones del fabricante antes de utilizar cualquier dispositivo electrónico cerca del agua.

A utiliser uniquement sur des surfaces lisses. Ne pas installer sur des lignes de coulis, des vides ou des surfaces texturées. Son retrait peut endommager les surfaces peintes ou refaites. Consultez les instructions du fabricant avant d’utiliser tout appareil électronique à proximité de l’eau.

• A MUST HAVE: SlipX Solutions On the Dot Suction Soap Saver keeps soap, sponges or other small bath items within easy reach.

• QUICK & EASY INSTALL: Press suction cup firmly to remove air underneath and create a secure seal. The suction cup will not “click” into place; however, you should push until you feel the suction cup engage the smooth application surface.

• QUICK DRY: Soap holder designed with excellent drainage helps soap or sponges dry fast to prevent messy soap build-up. Removable tray makes cleaning a breeze.

• STRONG HOLD SUCTION: Holds up to 11 pounds! Made of durable, rustproof plastic, this unique soap saver dish will last for years. Push-lock suction holds tight to smooth surfaces in your bathroom or kitchen.

• CONVENIENCE: Place exactly where you need it! This suction soap dish is easy to reposition and is a perfect solution for shower stalls, kitchens, laundry rooms, RVs and more.

• EASY TO REPOSITION: To remove, simply place a straight edge of a butter knife or credit card behind the suction cup. Rinse with warm water before repositioning (removal tool not included)

To Install:

• Make sure surface is clean.

• Remove plastic cover from suction cup.

• Position, then push suction cup firmly to engage.

• If reinstalling, rinse and air dry before reuse.

To Remove:

• Slide straight edge tool under suction cup  to release.

To Clean:

• Wipe clean with a damp cloth.

• Tray is removable for easy cleaning.

Use on smooth surfaces only. Do not install over grout lines, voids, or textured surfaces. Removal may damage painted or refinished surfaces.

Para uso exclusivo en superficies lisas. No debe instalarse sobre líneas de juntas, huecos o superficies con textura. Puede dañar las superficies pintadas o barnizadas al retirarse.

A utiliser uniquement sur des surfaces lisses. Ne pas installer sur des lignes de coulis, des vides ou des surfaces texturées. Son retrait peut endommager les surfaces peintes ou refaites.

• CONVENIENT STORAGE: Keep your shower essentials organized and within easy reach with the SlipX Solutions On the Dot Corner Basket. No more wasted space, this corner organizer provides plenty of room for multiple items—shampoo, conditioner, hair masques, razors, washcloths, loofahs, and more fit easily in this spacious compartment.

• EFFORTLESS SINGLE-PUSH INSTALLATION: Easily install this basket in seconds with a firm press. The powerful suction cups create a secure, air-tight seal on smooth surfaces. No drilling, tools, or waiting is required. Adjustable suction cups ensure a secure fit. Before adding items, tug hard on the basket to confirm a secure hold.

• LARGE CAPACITY & DURABLE: Designed to hold up to 22 pounds, this sturdy plastic basket is 100% rust-free and built to last. Its sleek, modern design fits any space and decor.

• VERSATILE & MULTI-USE: Curved to fit right-angle corners and most pre-molded shower stalls. Perfect for bathrooms and more to easily store multiple items, excellent drainage helps keep them clean and dry. Includes 2 removable hooks for added convenience and additional storage options for loofahs, razors, and more.

• QUICK REPOSITIONING: For easy removal, slide a butter knife or credit card under the suction cup. Rinse with warm water before reinstalling.

To Install:

• Make sure surface is clean.

• Remove plastic covers from suction cups.

To Remove:

• Slide straight-edge tool under suction cups to release.

• Position basket, then push suction cups firmly to engage.

To Clean:

• Wipe clean with a damp cloth.

• Squeeze hooks and insert into mid-sized hole in bottom of basket. Release.

• If reinstalling, wash suction cups with warm water and air dry before reuse.

Use on smooth surfaces only. Do not install over grout lines, voids, or textured surfaces. Removal may damage painted or refinished surfaces.

Para uso exclusivo en superficies lisas. No debe instalarse sobre líneas de juntas, huecos o superficies con textura. Puede dañar las superficies pintadas o barnizadas al retirarse.

A utiliser uniquement sur des surfaces lisses. Ne pas installer sur des lignes de coulis, des vides ou des surfaces texturées. Son retrait peut endommager les surfaces peintes ou refaites.

• EASY INSTALLATION: Easily install this basket in seconds. Clean and dry a smooth, non-textured surface. Position the basket suction cups entirely over the surface, not on grout lines. With two hands and a strong push, firmly push out the air behind each suction cup. Before adding items, tug hard on the basket to confirm a secure hold. The powerful suction cups create a secure, air-tight seal. No drilling, tools, or waiting is required.

• CONVENIENT STORAGE: Keep your shower essentials organized and within easy reach with the SlipX Solutions On the Dot Shampoo Basket. No more wasted space; this suction cup basket provides plenty of room for multiple items—shampoo, conditioner, hair masques, razors, washcloths, loofahs, and more fit easily in the spacious compartment.

• LARGE CAPACITY & DURABLE: Designed to hold up to 22 pounds, this sturdy plastic basket is 100% rust-free and built to last. Its sleek, modern design fits any space and decor.

• VERSATILE & MULTI-USE: Perfect for bathrooms, kitchens, and more, it easily stores bath accessories, kitchen utensils, or cleaning supplies. Includes built-in hooks for added convenience and additional storage options.

• QUICK REPOSITIONING: For easy removal, slide a butter knife or credit card under the suction cup. Rinse with warm water before reinstalling.

To Install:

• Make sure surface is clean.

• Remove plastic cover from suction cup.

• Position basket, then push suction cup firmly to engage.

• If reinstalling, wash with warm water and air dry before reuse.

To Remove:

• Slide straight-edge tool under suction cup to release.

To Clean:

• Wipe clean with a damp cloth.

Use on smooth surfaces only. Do not install over grout lines, voids, or textured surfaces. Removal may damage painted or refinished surfaces.

Para uso exclusivo en superficies lisas. No debe instalarse sobre líneas de juntas, huecos o superficies con textura. Puede dañar las superficies pintadas o barnizadas al retirarse.

A utiliser uniquement sur des surfaces lisses. Ne pas installer sur des lignes de coulis, des vides ou des surfaces texturées. Son retrait peut endommager les surfaces peintes ou refaites.

• ENHANCED SAFETY FOR THE WHOLE FAMILY: Adhesive Safety Treads are the perfect safety solution for kids, seniors, and everyone in between. These non-slip treads improve traction and grip on slippery surfaces like bathtubs, showers, boats, ladders, stairs, tiles, and more.

• ODOR & BUILDUP PREVENTION: Built-in product protection prevents unwanted odors and buildup for a fresher, cleaner anti-skid solution.

• POWER GRIP ADHESIVE: Equipped with SlipX Solutions’ high-performance adhesive, these treads securely adhere to smooth, non-textured surfaces like porcelain, fiberglass, or sealed wood to quickly add an anti-slip surface to your space. Designed for easy cleaning and long-lasting reliability, they stay firmly in place for years without the need for replacement.

• VERSATILE APPLICATIONS: Perfect for a variety of uses, including indoor and outdoor spaces—these safety stickers are a multi-purpose non-slip solution for any slippery surface without the hassle of a traditional mat or rug.

• WARNING: Designed for use on smooth surfaces only. For your safety, do not install over grout lines, voids, or textured/uneven surfaces, all of which negatively affect adhesion. This product is not intended for use on refinished surfaces. Always make sure that your stickers are securely attached before entering or exiting your tub, shower, or other slippery areas. No anti-slip product can prevent all accidents.

To Install:

• Clean surface carefully, using everyday cleanser. Dry completely.

• Wipe surface with rubbing alcohol to remove any soap/cleanser residue. Dry completely.

• Remove tread from backing material one at a time. Press each tread firmly onto surface, working from center outward.

• Make sure all outer edges firmly attach to surface.

• Do not touch adhesive or reposition treads during installation.

• Allow newly installed treads to stand for 12 hours before use.

To Clean:

• Use a damp sponge and non-abrasive cleanser.

To Remove:

• Free one edge with fingernail or plastic putty knife, then peel tread slowly away from surface.

• Soak any remaining adhesive residue with spray stain remover, wait 15 minutes then wipe with a clean, dry rag.

Use on smooth surfaces only. Do not install over grout lines, voids, or textured surfaces. Removal may damage refinished surfaces.

Úselo únicamente en superficies lisas. No lo coloque sobre juntas, huecos o superficies con textura. Al quitarlo puede dañar las superficies con retoques.

À n’utiliser que sur des surfaces lisses. Évitez de le poser sur les lignes de coulis, les trous ou les surfaces texturées. Son enlèvement peut endommager les surfaces rénovées.

• ENHANCED SAFETY FOR THE WHOLE FAMILY: Adhesive Safety Treads are the perfect safety solution for kids, seniors, and everyone in between. These non-slip treads improve traction and grip on slippery surfaces like bathtubs, showers, boats, ladders, stairs, tiles, and more.

• ODOR & BUILDUP PREVENTION: Built-in product protection prevents unwanted odors and buildup, for a fresher cleaner anti-skid solution.

• POWER GRIP ADHESIVE: Equipped with SlipX Solutions’ high-performance adhesive, these treads securely adhere to smooth, non-textured surfaces like porcelain, fiberglass, or sealed wood to quickly add an anti-slip surface to your space. Designed for easy cleaning and long-lasting reliability, they stay firmly in place for years without the need for replacement.

• VERSATILE APPLICATIONS: Perfect for a variety of uses, including indoor and outdoor spaces—these safety stickers are a multi-purpose non-slip solution for any slippery surface without the hassle of a traditional mat or rug. These bathtub treads are easy to install and measure 4.5”, 3.25’ and 2”.

• WARNING: Designed for use on smooth surfaces only. For your safety, do not install over grout lines, voids, or textured/uneven surfaces; all of which negatively affect adhesion. This product is not intended for use on refinished surfaces. Always make sure that your adhesive safety treads are securely attached before entering or exiting your tub, shower, or other slippery areas. No anti-slip product can prevent all accidents.

To Install:

• Clean surface thoroughly with rubbing alcohol. Dry completely.

• Arrange treads as desired. Remove backing one tread at a time.

• Press tread firmly onto surface.

• Use the enclosed smoothing tool in an outward motion from the center of each tread to avoid air bubbles and create an even, smooth bond between each tread and the application surface.

• Do not touch adhesive.

• Wait 12 hours before first use.

To Remove:

• Free one edge with fingernail. Peel tread slowly away from surface. Use a spray stain remover to wipe up any remaining adhesive residue.

To Clean:

• Use damp sponge and non-abrasive cleanser.

Use on smooth surfaces only. Do not install over grout lines, voids, or textured surfaces. Removal may damage refinished surfaces.

Úselo únicamente en superficies lisas. No lo coloque sobre juntas, huecos o superficies con textura. Al quitarlo puede dañar las superficies con retoques.

À n’utiliser que sur des surfaces lisses. Évitez de le poser sur les lignes de coulis, les trous ou les surfaces texturées. Son enlèvement peut endommager les surfaces rénovées.

• ENHANCED SAFETY FOR THE WHOLE FAMILY: These wide adhesive safety treads are the perfect safety solution for kids, seniors, and everyone in between. These non-slip treads improve traction and grip on slippery surfaces like bathtubs, showers, boats, ladders, stairs, tiles, and more.

• ODOR & BUILDUP PREVENTION: Built-in product protection prevents unwanted odors and buildup, for a fresher cleaner anti-skid solution.

• POWER GRIP ADHESIVE: Equipped with SlipX Solutions’ high-performance adhesive, these treads securely adhere to smooth, non-textured surfaces like porcelain, fiberglass, or sealed wood to quickly add an anti-slip surface to your space. Designed for easy cleaning and long-lasting reliability, they stay firmly in place for years without the need for replacement.

• VERSATILE APPLICATIONS: Perfect for a variety of uses, including indoor and outdoor spaces—these safety stickers are a multi-purpose non-slip solution for any slippery surface without the hassle of a traditional mat or rug.

• WARNING: Designed for use on smooth surfaces only. For your safety, do not install over grout lines, voids, or textured/uneven surfaces; all of which negatively affect adhesion. This product is not intended for use on refinished surfaces. Always make sure that your stickers are securely attached before entering or exiting your tub, shower, or other slippery areas. No anti-slip product can prevent all accidents.

To Install:

• Clean the surface carefully, using an everyday cleanser. Dry completely.

• Wipe surface with rubbing alcohol to remove any soap/cleanser residue. Dry completely.

• Working with one tread at a time, peel the paper backing away, then press the exposed adhesive area onto a clean application surface.

• Use the enclosed smoothing tool in anoutward motion from the center of each tread to avoid air bubbles and create an even, smooth bond between each tread and the application surface.

• If you encounter a trapped air bubble that you cannot eliminate with your smoothing tool, pick the bubble with a needle and re-smooth the area.

• Do not touch adhesive or reposition treads during installation.

• Allow newly installed treads to stand for 12 hours before use.

To Clean:

• Use a damp sponge and non-abrasive cleanser.

To Remove:

• Free one edge with a fingernail or enclosed smoothing tool, then peel tread slowly away from surface.

• Soak any remaining adhesive residue with spray stain remover, wait 15 minutes, then wipe with a clean, dry rag.

Use on smooth surfaces only. Do not install over grout lines, voids, or textured surfaces. Removal may damage refinished surfaces.

Úselo únicamente en superficies lisas. No lo coloque sobre juntas, huecos o superficies con textura. Al quitarlo, puede dañar las superficies con retoques.

À n’utiliser que sur des surfaces lisses. Évitez de le poser sur les lignes de coulis, les trous ou les surfaces texturées. Son enlèvement peut endommager les surfaces rénovées.

• MAKE BATH TIME MORE FUN: Turn an everyday bath into an underwater adventure with fun peel & stick duck or shark-shaped tub treads that add traction to slippery surfaces.

• 5 PER PACK: Each package includes 5 playful shark or duck non slip bathtub stickers, giving you plenty of coverage for your tub or shower while adding a fun touch to bath time.

• GRIP THAT LASTS: Designed to provide reliable traction bath after bath, these tub treads are the perfect bath accessories—they’re easy to install and simple to clean for long-lasting everyday use.

• FUN-SIZED FOR TUBS & SHOWERS: Each Duck or Shark Tub Tattoo measures 4.4” W x 3.7” H, making them a fun and functional addition to your bathing space—create your own patterns for customized safety.

• FOR SMOOTH SURFACES: Designed for use on clean, smooth tub and shower surfaces. Surface texture may affect adhesion. These anti slip shower stickers are not recommended for use on refinished surfaces.

To Install:

• Clean the surface thoroughly with rubbing alcohol. Dry completely.

• Arrange treads as desired. Remove backing one tread at a time.

• Press tread firmly onto surface.

• Use the enclosed smoothing tool in an outward motion from the center of each tread to avoid air bubbles and create an even, smooth bond between each tread and the application surface.

• Do not touch adhesive.

• Wait 12 hours before first use.

To Remove:

• Free one edge with a fingernail. Peel tread slowly away from surface. Use a spray stain remover to wipe up any remaining adhesive residue.

To Clean:

• Use a damp sponge and non-abrasive cleanser.

Designed for use on smooth surfaces. Some surface textures may affect adhesion. Not for use on refinished surfaces.

Conçu pour une utilisation sur des surfaces lisses. Certaines textures de surface peuvent en affecter l’adhérence. Ne pas utiliser sur les baignoires avec une surface rafraichit.

Diseñadas para su uso en superficies lisas. Algunas texturas de la superficie pueden afectar la adherencia. No debe ser usado en bañeras con superficies reparadas.

• ENJOY A BETTER BATH EXPERIENCE: Bottomless Bath is a must-have bath essential for your tub—adding a few extra inches of water makes all the difference! Treat yourself to a luxury spa-like bath with this overflow drain cover.

• BATH ACCESSORIES FOR THE TUB WOMEN LOVE: Stop listening to water trickle down the drain and sink into bubbles, salts, magnesium flakes, and scented soaps in peace. The Bottomless Bath prevents water from entering the perimeter of the overflow drain, so you can soak in peace.

• DESIGNED WITH POWER GRIP SUCTION CUPS: Our proven high-quality material and powerful suction cup design create a powerful, long-lasting seal. When you’re filling the tub, simply run warm water over the suction cups and press each suction cup firmly against the tub.

• PERFECT FIT FOR MOST DRAINS: Measuring 4-inch inner diameter and 2 in. deep, the Bottomless Bath fits commonly found bathtub overflow drains, like toggle/trip lever, flat, or snap drain types.

• GREAT GIFT IDEA FOR MOM: This bathroom overflow tub drain cover makes the perfect Birthday and Christmas gift for a mom who has everything!

To Use:

• Run warm water over suction cups.

• Place Bottomless Bath over the overflow drain cover with the 1” hole facing up.

• Press each suction cup firmly against the tub to create a seal.

• Fill tub with water.

• The 1” hole will release excess water from the tub into the overflow drain.

To Clean:

• Simply rinse and air dry after use.

• If needed, wash in top rack of dishwasher.

• DEEPER, WARMER BATHS – Enjoy a full-body soak with the Better Soak Adjustable Overflow Drain Cover. Designed to add up to 4.5 extra inches of water to your bath tub, it helps create a warmer, more relaxing bathing experience with fuller coverage than standard overflow covers.

• ADJUSTABLE UNIVERSAL FIT – Designed to fit drain styles other overflow covers don’t, including toggle/trip lever, flat, snap-on, and many clawfoot tub drains. A versatile solution for households with different tub configurations.

• STRONG SUCTION CUPS – 14 strong suction cups keep this overflow drain cover in position over your overflow cover reducing water escape while your tub fills. Spend less time refilling warm water and more time unwinding in spa-like comfort.

• BUILT-IN SAFETY OVERFLOW – Made with an integrated emergency overflow opening at the top that allows excess water to drain if water levels get too high, helping provide peace of mind while maintaining a deeper soak experience.

• EASY TO INSTALL & REMOVE – Before each use, simply run the suction cups under running water, press gently onto a smooth tub surface, fill, and enjoy a deeper bath in seconds. Flexible silicone construction is waterproof, reusable, and dishwasher safe for easy cleaning.

• MADE FOR A BETTER BATH EXPERIENCE – Ideal for bath lovers seeking a spa-like soak without complicated installation or permanent tub modifications. A thoughtful self-care gift for birthdays, holidays, Mother’s Day, or anyone who enjoys relaxing baths.

To Use:

• Expand Better Soak to size needed to cover your overflow plate.

• Run warm water over suction cups.

• Place Better Soak against tub wall with hole facing up. Adjust as necessary to achieve desired water depth.

• Press each suction cup firmly against tub to create seal.

• Fill tub with water. Holeon top will release excess water from tub into overflow drain.

To Clean:

• Simply rinse and air-dry after use.

• If needed, wash in top rack of dishwasher.

• Traps hair to prevent drain clogs.
• 2 Stop-A-Clog drain hair catchers per package.
• This hair strainer is designed to fit over flat and open shower and tub drains.
• 3-inch inner diameter and 5.25-inch outer diameter. 1-inch height.
• Machine washable

To Use:

• Make sure the bathtub or shower surface is clean.

• Center STOP-A-CLOG over the drain.

• Run water, then push down on individual suction cups to engage.

To Clean:

• Simply rinse and air dry after use.

• If needed, wash in top rack of dishwasher.

To Remove:

• Grasp an edge and peel back slowly from surface.